Installing
plumbing lines requires cutting holes and channels in papercrete. It was very
easy in fibrous concrete bricks when compare to padobe bricks.
Electrical runs were cut with a circular saw or chain saw. To make holes for
outlets, horizontals and vertical slits was cut with a circular saw. Then
unwanted pieces were removed with a screwdriver.
Outlet boxes can be angle screwed directly into
the papercrete. Home fires start, where the wiring enters the outlet boxes. So,
nonflammable mortar should be put behind the outlet boxes for safety. Once the
electrical wiring and outlets are installed and then tested, the channels for
the electrical runs are for filled with papercrete
No comments:
Post a Comment